Every action of the tube filler machine needs to be used in conjunction with the mold. If the mold is too loose or too tight, it will affect the normal use of the machine.
Tube filler machine mold is too loose
If the mold is too loose, when the tube is pressed, heated and sealed up and down, it will bring the tube out, causing the next action to not work properly.
Tube filling and sealing machine mold is too tight
If the mold is too tight, it may not be easy to insert the tube into the mold during automatic tube loading and manual intubation, and the product cannot be ejected well after the product is ejected later, and the surface of the tube is easy to be scratched.
Therefore, the mold of the tube filling and sealing machine is customized according to each type of pipe, one type of pipe diameter, one type of mold, even for the same pipe diameter, because the products made by each hose manufacturer are different, And the thickness of the hose is not the same, resulting in a difference in the diameter of the hose. This is why the customer must provide the final finished tube when making the filling and sealing machine.
SZT Equipment Co., Ltd. adopts the internal heating and sealing method. When the hose is heated and the super cooled water needs to be customized for the nozzle, otherwise it is easy to cause uneven heating of the tube, which will affect the end capping effect The company's filling and sealing machine adopts the internal heating and sealing method. When the hose is heated and the supercooled water needs to be customized for the nozzle, otherwise it is easy to cause uneven heating of the tube. Circumstances affect the subsequent sealing effect
Smart Zhitong has many years of experience in the development, design tube filling and sealing machine
If you have concerns please contact
@carlos
Wechat WhatsApp +86 158 00 211 936
For more tube filler machine type . please visit the website https://www.cosmeticagitator.com/tubes-filling-machine/
Post time: Dec-03-2022
