1. Make sure that the filling product you want to buy can be filled. If the filling range is different, the price is also different. If filling products with large gaps, the filling and sealing machine can fill as much as possible.
2. High cost performance is the principle. The quality of the filling and sealing machines produced now has been greatly improved compared with the previous ones, and they are driven by imported machines.
3. After-sales service guarantee. Timely after-sales service is especially important for food processing enterprises. Such as beverage enterprises, summer is the peak production period. If there are any problems in production and cannot be solved immediately, the loss can be imagined.
4. Try to choose a Plastic Tube Filler company with a long history to ensure product quality. Choose a mature and stable quality model to make packaging faster, more stable, low energy consumption, low manual work, and low scrap rate. The filling and sealing machine is a machine that consumes energy. If we buy low-quality machines, the packaging film will be wasted in the future daily production will not be a small amount.
5. On-the-spot investigation, try out as many samples as possible.
In addition, how do you judge the quality of Plastic Tube Filler you choose? From the following aspects, you can test whether the quality of plastic tube filling sealing machine you purchased is too good or not.
1. After the end is sealed, there should be no scratches, no mess, no leakage, no burning and crushing at the end of the hose, and the printed date should be clear.
2. After the sealing test of the tube , the sealing end should be intact.
3. The passing rate of filling accuracy should not be less than 98%.
4. The passing rate of the package should not be less than 98%.
5. The noise of the hose sealing machine should not exceed 75dB(A).
6. The insulation resistance of plastic tube filling and sealing machine measured when 500Vd.c. is applied between the power circuit wire and the concerned grounding circuit should not be less than 1MΩ.
7. plastic tube filling sealing machine should have a reliable grounding device and a grounding symbol. The grounding resistance should meet the requirements of 19.2 in GB 5226.1.
8. Plastic Tube Filler should be a withstand voltage test for at least 1s between the circuit wires of the electrical equipment and the grounding circuit.
Smart Zhitong has many years of experience in the development, design Plastic Tube Filler such as plastic tube filling sealing machine
If you have concerns please contact
Wechat WhatsApp +86 158 00 211 936
For more tube filler machine type . please visit the website https://www.cosmeticagitator.com/tubes-filling-machine/
Post time: Nov-23-2022
