Daily maintenance and use of ointment tube filling and sealing machine
In the daily production process, we should pay attention to the daily maintenance of the equipment in time to avoid equipment failures affecting production as much as possible. When we use the ointment filling and sealing machine, in addition to enjoying the convenience brought by its production, we should also maintain it according to the method. When the maintenance method is right, it can effectively do quantitative canning of sauces and sauces. It can be maintained by:
ointment tube filling and sealing machine check items
a. The equipment is suitable for the ambient temperature of – 5°C ~ 40°C, and the relative humidity is < 90°C. The most suitable temperature should be placed in a ventilated, dry and clean place;
b. Before starting up, check whether the power supply voltage is normal and whether the socket has a safety ground wire.
c. When using, if the power cord is damaged (copper wire is exposed), you should pay attention to purchase the same type of power cord in time, and do not use other power cords to avoid accidents.
d. Thoroughly clean before operation, wipe off oil or dirt with non-woven cloth and detergent, and then dry with non-woven cloth. According to GMP requirements, check whether the contact parts of equipment and materials meet the corresponding cleaning requirements, if not, clean and dry again. Cleaning methods according to process requirements;
e. After use, the ointment filling and sealing machine also needs to be cleaned and maintained to prolong the service life of the ointment filling and sealing machine.
Carrying out maintenance according to the above method can guarantee the normal production of the ointment filling and sealing machine to the greatest extent. At the same time, when cleaning the filling and sealing machine, carefully check whether the compressed air is turned off, and then clean it in the correct way.
The ointment filling and sealing machine is a piston type filling and sealing machine, which is used for filling paste materials, and can quantitatively fill facial cleanser, mascara, sunscreen and other products. With the acceleration of the modernization process, people’s demand for different products is increasing, and the demand for industrial production capacity is also gradually increasing. Our enterprise’s demand for automated production is also increasing. In order to ensure the production efficiency of the product, we should do a good job in the daily maintenance of the product.
ointment tube filling and sealing machine basic feature
1. The filling accuracy of ointment tube filling and sealing machine will be affected by factors such as air pressure stability, material uniformity, and filling speed.
2. The filling speed of ointment tube filling and sealing machine will be affected by the following factors: the viscosity of the material. The stroke of the cylinder, the size of the filling nozzle, and the proficiency of the operator.
3. The machine has two filling modes, foot-operated and automatic, which can be switched at will.
4. The rotary valve used in this machine is made of wear-resistant, acid-resistant and high-temperature-resistant PTFE material. It cannot be bumped randomly during the cleaning process.
Under the maintenance of the ointment filling and sealing machine, through the latest PLC control system and further improved product design, the production efficiency of the manufacturer can be improved to a higher level
Smart zhitong It is an ointment tube filling and sealing machine integrating design, production, sales, installation and service. It is committed to providing you with sincere and perfect pre-sales and after-sales services, benefiting the field of chemical equipment
@carlos
Wechat WhatsApp +86 158 00 211 936
Website:https://www.cosmeticagitator.com/tubes-filling-machine/
Post time: Mar-09-2023
